2007-2014 Toyota FJ Cruiser 2" Front Leveling/Lift Kit
Add to Cart:
2007-2014 Toyota FJ Cruiser 4WD-2WD
This kit will only fit the 6-lug models--WILL NOT FIT the 5-lug model.
Due to popular demand we are now manufacturing and offering a Front lift/leveling kit for the 2007-2013 Toyota FJ Cruiser 4wd or 2wd.
This kit is manufactured in America by Auto Spring Kits. Manufactured from heavy duty steel not plastic or aluminum that can break down or corrode!
NO STRUT DISASSEMBLY IS REQUIRED TO INSTALL OUR KIT.
Other kits require you to completely remove the struts and disassemble them with a coil compressor tool (and it better be a heavy duty one cause the factory coils are stiff). They claim 1.5 hrs (for a suspension mechanic with the right tools on a good day).
Our Steel spacer simply bolts on top of your existing strut. The 1-1/4 inch thick spacer will lift the front end 2 inches due to the control arm angles and strut placement in relation to the spindle. After installing this kit you can easily clear 33" tires on factory width wheels.
We designed this kit with strength and ease of install in mind. We use the highest quality materials, including: Zinc plated hardware and Nylock nuts. Our front spacers are fabricated from heavy duty 1/4" CNC LASER cut U.S. steel and 1/4" thick wall D.O.M tubing.
These babies won`t break. GUARANTEED FOR LIFE.
This kit WILL NOT CHANGE your factory soft ride at all. No special tools required and the kit only takes one and half hours to install! Your coils are STEEL and your struts are also, so why use a leveling kit made from plastic that will break down or aluminum that will corrode?
Our kit comes complete with:
If you have been looking at the various Toyota forums, you have probably read about the problem with premature strut failure. This failure is caused by installing a spacer (plastic or aluminum) in between the coil. This pre-loads the stut/coil causing a much stiffer ride but also over-extends the strut shaft causing the strut to leak and fail, and in some severe cases completely separate. NOT GOOD!
Our kit WILL NOT cause the struts to fail because our steel spacers simply bolt on top of the strut, not in-between. NO COIL/STRUT PRELOAD AND THE FACTORY SMOOTH RIDE IS UN-CHANGED.
Available in GLOSS BLACK POLYURETHANE FINISH
Note: After installing this or any other lift/leveling kit you will need to re-align the front end. However, only toe in will need to be corrected. NO SHIMS or additional parts are required.
FREE SHIPPING IN THE LOWER 48 STATES.
Add to Cart:
This product was added to our catalog on Tuesday 23 August, 2011.